Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.5mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Ash Gray
At layer #10 (0.88mm) swap to Beige
At layer #24 (2mm) swap to Jade White for the rest.
This is my first one, so still work in progress. This one is a little thick, but I was running into them coming out to thin and ripping when removing from the build plate.

PLEASE LET ME KNOW IF YOU HAVE ANY POINTERS.