Night Wolf print by Tellervo

Tellervo

Generative 3D Model>Hueforge & Lithophane

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 1 walls, 100% infill

Designer

1.3 h

1 plate

Thicker version 0.08mm layer, 1 walls, 100% infill

Designer

2.7 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Wolf print. Neither print uses much filament and the thinner one is great for framing or you could go frameless and use bluetack to put on your wall like I do.

Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions for thin version:
    Start with Black
    At layer #3 (0.4mm) swap to Ice Blue
    At layer #10 (0.96mm) swap to Yellow for the rest.

Swap Instructions for thicker version:
    Start with Black
    At layer #15 (1.36mm) swap to Ice Blue
    At layer #22 (1.92mm) swap to Yellow for the rest.

If you want to resize, do NOT resize on the Z axis. That will mess with the color blending.

Comment & Rating (0)

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.