Tactical Self Defense Dual Spike Tool - 3 Sizes by ZGremlin

ZGremlin

Props & Cosplays>Replica Weapon

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 10% infill

Designer

4.6 h

6 plates

4.9(10)

A1 Mini Print 0.2mm layer, 3 walls, 10% infill

Designer

5.2 h

6 plates

5.0(3)

Open in Bambu Studio

Boost

Released

Description

*4/19/24 Update: Blade bevel is now easily editable for Bambu Studio painting mode. Fill mode now working with each beveled face.

This tool is designed to be easily carried and quickly used to defend yourself when no other options are available. Carry in your purse, pocket or attach to a keychain for convenience.

Please check your local or state laws to verify if tools like this are legal to carry in your area.

I suggest printing this in PETG, ASA, ABS or Carbon Fiber reinforced filament. If you want a heavier tool increase the infill to 30%+.

If none of the sizes meet your specific needs, feel free to adjust the scaling of any of the models! I've got as high as 150% and as low as 40% for testing.

There are 6 pre-built plates for each size with and without the keychain holders.

keychain self defense

Comment & Rating (14)

@DefMaker

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

good

@INNERVISION

Print Profile

0.2mm layer, 3 walls, 10% infill

Great model. Thank you

@user_4080456882

Print Profile

0.2mm layer, 3 walls, 10% infill

clean print every time

@flow35

Print Profile

A1 Mini Print 0.2mm layer, 3 walls, 10% infill

Nice print. Thank you!

@Jayhuc

Print Profile

0.2mm layer, 3 walls, 10% infill

used petg cf. super strong. will print more. Thank you. also boosted you.

@miffynz

These look awesome. I'd highly recommend doing them in C (Polycarbonate) if your printer supports it as its strong again but it is lightweight which isn't ideal but you could print it at higher infill to offset that and is is a huge jump up in strength from the other filaments.

@user_1285814345

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Printed easily, no hiccups

@drewbee44

Print Profile

A1 Mini Print 0.2mm layer, 3 walls, 10% infill

@user_4232301366

Print Profile

0.2mm layer, 3 walls, 10% infill

@user_2386517830

Print Profile

0.2mm layer, 3 walls, 10% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.