Update: I added slimmer springs 1mm and 1.5mm thick because the original spring (2.5) is too strong when the model is scaled up. They are in the files section. Note: If you scale this model up you will need glue to keep the body together.

This is an update of the original version which can be found here:

https://makerworld.com/en/models/425343#profileId-328936

Do you have a naughtly toddler going around opening drawers and cabbinets? Here is a useful print that can prevent them from opening the cabinets around the house.

This is a multi part (6 Pcs) model. All the parts must be printed.

Assembly is a snap into place mechanism.

You will need 2x 3m tapes (30x30 mm) to stick this to the cabinet. Smaller sizes should work too, or you can cut it to size.

Springs are no longer required as it has the push mechanism built into it.

Here is the assembly video. The process is the same except now there is no need to add any springs.

Hope you like the model. If you do, remember to like and share.

I am open for feedback and suggestions.

As always, Happy printing!