USB-C cover by 3D Manufacturing

3D Manufacturing

Tools>Gadgets

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Designer

12 min

1 plate

4.6(15)

0.08mm layer, 2 walls, 15% infill

10 min

1 plate

4.0(11)

0.2mm nozzle, 0.06mm layer, 4 walls, 60% infill

49 min

2 plates

4.3(3)

High Quality Profile, 0.08mm layer, 3 walls, 15% infill

11 min

1 plate

5.0(2)

Click to see more

Open in Bambu Studio

Boost

177

296

305

184

Released

Description

simple dust protection cover for your USB-C port.

I used it for my smartphone, which i only charge wireless.

Comment & Rating (40)

@makshay

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

printed well!

@br1acc

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Had to scale down X/Y by 5% for it to fit.

The designer has replied

@3DManufacturing

@br1acc maybe there's a difference between usb-c 3.2 and 4.0? or my socked is worn out :D

(Edited)

@Kerlt

it fits well but it dosnt go all the way in, I’ll reprint it but do less layers to see if it fits better

@0ldman

Boosted

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Printed without any issues and fits perfectly! 👍🏻

@Vinzbull13

Print Profile

0.08mm layer, 2 walls, 15% infill

impression en TPU impeccable après l'avoir un peu raccourci.

@MarcoDB

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Nice👌🏻

@kuronekoshi

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

very useful little print

@JSDESING

Print Profile

0.08mm layer, 2 walls, 15% infill

Strength Issue:I don't know what is wrong with this print profile, but it creates a large blob on the side that prevent it to fit in any usb-C port. Tested with 2 different Filaments with the same result. I've finally been able to print it with the standard 0.2 layer height from bambu studio. I've uploaded my print profile for those who want to print this with a normal 0.4mm nozzle.