Vault TEC Hueforge by Edelassi

Edelassi

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.12mm layer, 2 walls, 100% infill

Designer

3.1 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Beige Transmission Distance: 8
PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #13 (1.12mm) swap to Yellow
At layer #19 (1.6mm) swap to Beige
At layer #20 (1.68mm) swap to White for the rest.

fallout

vault

hueforge

Comment & Rating (2)

@Neighborgeek

It is my understanding that PETG and PLA don't stick to each other well, so I'm surprised to see that you used PETG for the black and white and PLA for the other colors. Did that work out ok, and what was the reason for this choice?