_____________________________________________________________________________________________
I design a dash-cam case specific for ESP32-CAM OV2640. You find this on Aliexpress.
The cam of this ESP32 is the standard that you receive with the ESP32 kit.
The specific ESP32-CAM OV2640 model is this:
I choose this TTL with USB-C so you will never again broke the side buttons. To be clear , I post a picture of the older TTL version and I broke up so many times the side buttons:
For this case you need this TTL:
As you see in this last pic , you got the new TTL with USB-C and side bottoms on the top.
1) 3.7V battery
2) Powerbank and USB-C cable. This is a better option so the heat pass through the USB-C port hole.
1) A profile for those who use the ESP32 with the 3.7V battery, so in the profile there is a 0.4mm thick spacer to be printed together with the case
2) A profile for those who use the ESP32 with the power bank, so in the profile there is a 6.2mm thick spacer to be printed together with the case
I based the case PROFILE for the ESP32 WITH THE BATTERY considering the size of the battery that can be purchased from Aliexpress online. So since I didn't buy it, I simply took the measurements.
If they are wrong, write me a message and I will resolve this error.
To print the case you need:
1) ABS or higher TEMPERATURE filaments like PC, PA6-GF / CF or PAHT for the case , spacer and lid
2 ) CLEAR PETG to cover the hole of the LED LIGHT
3) TPU 95A HF for the USB-C CAP. You shouldn't have it, because if you want you use the same filament you print the case
π½πΎππΈπ²π΄:
ππ·πΈπ πΈπ π° ππΈπΌπΏπ»π΄ πΏππΈπ½π. π°π ππΎπ ππ΄π΄ πΈπ½ ππ·π΄ πΏπΈπ²ππππ΄π , πΌπ πΌπΎπ³π΄π» πππΈπ²πΊ π π΄ππ πΆπΎπΎπ³ πΎπ½ ππ·π΄ π±π΄π³. ππΎ π±π΄π΅πΎππ΄ ππΎπ πΆπΈπ π΄ π±π°π³ ππ°ππΈπ½πΆ ππΎ πΌπ πΏππΎπ΅πΈπ»π΄π, π±π΄ ππππ΄ ππΎπ π·π°π π΄ π° πΆπΎπΎπ³ π±π΄π³ π°π³π·π΄ππΈπΎπ½ π°π½π³ π°ππΊ ππΎ ππΎππππ΄π»π΅ , ππ·π ππΎπ π³πΎπ½'π π·π°π π΄ π° πΆπΎπΎπ³ π±π΄π³ π°π³π·π΄ππΈπΎπ½. πΈ π³πΎπ½'π ππ°π½π ππΎ ππΏπ»πΎπ°π³ π° π»πΎπ πΎπ΅ πΏππΎπ΅πΈπ»π΄π π΅πΎπ π΄π°π²π· ππΈπ½πΆπ»π΄ πΏππΎπ±π»π΄πΌ ππΎπ π·π°π π΄ π°π½π³ π΅πΎπ π΄π π΄ππ ππΈπ½πΆπ»π΄ πΌπΎπ³π΄π»! π΄π π΄π½ ππΎπ ππ°π½π ππΎ ππ·π°ππ΄ πΎπ½π΄ , πΈπ π³πΎπ΄ππ½'π πΌπ°πΊπ΄ ππ΄π½ππ΄ π΅πΎπ ππ·π΄ ππΈπΌπΏπ»π΄ πΌπΎπ³π΄π» πΈπππ΄π»π΅!
πΏπ»π΄π°ππ΄, π»πΈπΊπ΄ πΈ ππ°πΈπ³ ππ·π΄ πΌπΎπ³π΄π» πππΈπ²πΊπ πΎπ½ ππ·π΄ π±π΄π³ π΄π°ππ! π½πΎπ π°π»ππ°ππ ππ΄π³ππ²πΈπ½πΆ ππ·π΄ ππΏπ΄π΄π³ π²π°π½ π·π΄π»πΏ ππΎπ ππΎ πππΈπ²πΊ π΄π π΄ππ πΌπΎπ³π΄π» πΎπ½ ππ·π΄ πΏπ»π°ππ΄! ππ·π°π½πΊ ππΎπ π΅πΎπ ππ·π΄ ππ½π³π΄ππππ°π½π³πΈπ½πΆ!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.