Vise 120x60x40mm
Copyright Claim
Vise 120x60x40mm
Boost
3
2
3
Print Profile(2)
0.16mm layer, 3 walls, 20% infill
Designer
3.8 h
1 plate
0.16mm layer, 3 walls, 25% infill
Designer
4.4 h
1 plate
Open in Bambu Studio
Boost
3
2
3
1
13
3
Released
Description
A simple vise with a sturdy, near tollerance free loose jaw and 2 grooves for clamping down.
Assemble with 2 countersink screws M3x16mm
I added a hole in the spindle to screw in a M3x12 screw for extra strength.
Comment & Rating (3)
All
The screw mechanism broke the first time I tried to use it. I guess it can still be used with a quick clamp, though it would be awkward. Original print was 25% infill. I will try reprinting the screw at 100% infill with some PETGCF and update.
The designer has replied
1
Reply
I added a hole in the spindle to screw in a M3x12 screw for extra strength.
0
Reply
Quick and easy print with no supports, no fuss. Took a while to get the M3 screws started. Now just need to knock up a mounting plate and I think it could use some knurling on the handle but it is great as is for some light soldering. Great design. Printed at 250mm/s on my A1 with Elegoo Rapid PLA +.
(Edited)
1
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld