FIFA World Cup trophy by santiis2010

santiis2010

Art>Other Art Models

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 5% infill 49% Scale A1mini

3.2 h

1 plate

4.0(3)

Open in Bambu Studio

Boost

Released

Description

Do not share on other sites this is intended to be downloaded from my profiles in Makerworld (https://makerworld.com/en/models/429622?from=search), Prusa Printable (https://www.printables.com/es/model/845312-fifa-world-cup-trophy-original-designer) and Thingiverse https://www.thingiverse.com/thing:5744650!

I have seen many users are stealing my work like nyx_nk in bambulabs who posted my design without my permission: https://makerworld.com/en/models/137513#profileId-149650

And this other ones in Prusa Printers: https://www.printables.com/es/model/390073-fifa-world-cup-trophie and https://www.printables.com/es/model/388544-fifa-world-cup-trophy-fixed and this one https://www.printables.com/es/model/375472-copa-del-mundo-seccionada-fifa-worl-cup

The FIFA World Cup Trophy, who does not want to have the biggest trophie from planet earth?

FYI: This model fits perfect on printer with Z axis of 40cm I used an Anet ET5 Pro 30x30x40cm, if you want to print on small printers like Ender 3 you need to use Prusa Slicer or Cura and cut the trophie in 2 parts with any of those two slicers.

The trophie is REAL size

UPDATE:

Fixed the I and F that may print incorrectly on some printers and they fall from the trophy.

Comment & Rating (6)

@urbi_44

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill 49% Scale A1mini

Strength Issue:The model has a great quality of details, but the model broke in the thinner diameter point after falleing down from a table. I re-printed the model with the bambulab profile "0.2 strength", and 6 walls instead of 2 and now it looks a lot more solid.

The designer has replied

@Osama414

Boosted

The trophy is not intended to be used as a throwing object (at least I hope not!). The profile focuses on saving materials and printing time for a display object. there are no strength issues in this regard, which is a preference of the majority of people. Obviously, more infill and walls would make it stronger, thicker, and hefter if this is the preference. You are giving a lower rating to a print profile for the wrong reasons but that's ok :) have a good one.

@user_3768112400

Print Profile

0.2mm layer, 2 walls, 5% infill 49% Scale A1mini

the top of the world was a little bit mess but i dont know if thats just my primter cause i have a1 mini.?

The designer has replied

@Osama414

Boosted

The photo in the print profile is printed using A1 mini. if it's worse, then most likely the filament settings need to be changed. If it is the same but you want a better dome, you will need to enable "variable heights" and maximize to quality. It improves doom shape defects but will take a longer time to finish (won't be perfect but will have a better result)

@3barefeet

Don't you realize that nyx_nk posted the model before you did, and that you are falsely accusing them?

@user_1289661847

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill 49% Scale A1mini

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.