Chain PTFE Clip x4
Copyright Claim
Chain PTFE Clip x4
Boost
8
25
15
Print Profile(1)
0.2mm layer, 6 walls, 25% infill
Designer
15 min
1 plate
Boost
8
25
15
0
101
64
Released
Comment & Rating (15)
All
Print Profile
0.2mm layer, 6 walls, 25% infill
For some reason the scale is too big for X1C. I tried scaling to 80% and it was close. The big one is from both the stl and the 3mf files. Please check.
(Edited)
1
Reply
I have an idea that the uploader has a non original cablechain. I tried another of his designs marked as for x1c and it did not fit, it was too tall and scraped on the glass, despite setting the bracket on the hotend to its lowest possible position. the uploader should be more restrictive on labels imo.
(Edited)1
Reply
Replying to @hans.j.pedersen
There’s a big chance I’m not aware of that two chain sizes exists. Anyhow, no biggie, besides the author hasn’t bothered to reply 🫤
(Edited)1
Reply
Replying to @GenericUser
i found these to snap on in satisfactory way sir.
i printed them at 0.08mm with three walls and 100% infill.
https://makerworld.com/nb/models/33060#profileId-29778
(Edited)
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Printed well and holds PTFE well
The designer has replied
1
Reply
thanks maker
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
scale was way off
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Leider zu groß die Teile
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Don't fit to P1S
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Fit Chain Well - Nice Print
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution
© 2024 MakerWorld