Master Chief - Halo Hueforge

My other Video Game Hueforge can be found here:
https://makerworld.com/@CanadianGamer/collections/835925

-----------------------------------

The pictured Frame is a friction Fit design here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475

In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

And if you scale it down, I have frames for 100x100 or 150x150 here:

https://makerworld.com/en/models/173529#profileId-190705

Please post a picture of your printed copy! I'd love to see it!

I have started a Patreon which includes a tier for custom designs.  For more details please check out the link in my profile or: patreon.com/CanadianGamer3DPrintsEDM

— Printing Instructions---

This print is 7 colours, but the bambu labs green layer is very subtle, if you did it with 6 colours instead of that extra green it would turn out fine.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Matte Dark Brown Transmission Distance: 2.1
PLA Bambu Matte Dark Green Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA Bambu Matte Dark Green Transmission Distance: 4
PLA Bambu Basic Gold Transmission Distance: 5
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Brown
At layer #12 (1.04mm) swap to Matte Dark Green
At layer #14 (1.2mm) swap to Orange
At layer #18 (1.52mm) swap to BambuLab Green
At layer #19 (1.6mm) swap to Matte Dark Green
At layer #25 (2.08mm) swap to Gold
At layer #27 (2.24mm) swap to Ivory White for the rest.