Hueforge - Disney - Stitch Heart by Cloudy Nostalgia

Cloudy Nostalgia

Generative 3D Model>Hueforge & Lithophane

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

P1S - 0.08mm layer, 2 walls, 100% infill

Designer

4.5 h

1 plate

4.8(44)

A1 Mini - 0.08mm layer, 2 walls, 100% infill

Designer

2.8 h

1 plate

5.0(6)

0.08mm layer, 2 walls, 100% infill - Scaled down for A1 Mini

2.3 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

265

445

105

453

310

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Cyan Transmission Distance: 4.8
PLA Sovol PLA White Transmission Distance: 8.8

Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Blue
At layer #17 (1.44mm) swap to Cyan
At layer #23 (1.92mm) swap to White for the rest.

**IMPORTANT INFORMATION**

You cannot adjust the z scaling on any hueforge. This will mess with the coloring done and your hueforge will not come out as intended. You can however change the x and y to scale the picture. I recommend only changing by the same percentage.
To get an accurate print as shown in the photos you MUST use the same filaments listed below. You can change brands (as long as they are similar) but keep the filament colors the same. If you use any other color, you will not get the same results as me.
What you see in the slicer will not be how the final results will look! Hueforge takes advantage of color bleed to make the blended colors!

Comment & Rating (105)

@user_334534792

I used glow in the dark instead of white. came out awesome

The designer has replied

@cloudynostalgia

Thats sick!!! thanks for the share I might do this now!

@Koled

I went with a 3 color print, because I didn’t like the way the lighter blue looked in the layering and night scenes have a notable absence of color anyway.

The designer has replied

@cloudynostalgia

Hey that looks pretty cool! Don't forget to upload it as a print profile in case anyone else wants this style! Thank you for your support!

@Koled

oh will do when I get home, didn’t realize that was an option! thanks!

@Andor_Yoko

Boosted

My first Hueforge print! The design is awesome especially the light on dark contrast. I will have to adjust some settings for future hueforge prints for some better quality. All in all I am blown away by what just 4 colors can do.

(Edited)

The designer has replied

@cloudynostalgia

Awesome!! Welcome to hueforge! haha its a whole other world! I am happy you enjoyed it! What settings were you talking about for the better quality!? let me know so I can include them on my files :)

@Andor_Yoko

Boosted

Replying to @cloudynostalgia :

I have an ender so I could not use your print profile, I am sure yours would be better :) My retraction settings were wrong (a lot of oozing because of no retraction), and I should have used a thinner line width and some slower printing for the 100% infill.

@cloudynostalgia

Replying to @Andor_Yoko :

Oh ok gotcha! well hey it didnt turn out bad it still looked pretty good! I think you are being to hard on yourself! anyways let me know if you have more questions or even recommendations!

@DNewman5

Print Profile

P1S - 0.08mm layer, 2 walls, 100% infill

fantastic

The designer has replied

@cloudynostalgia

Awesome! I am happy you liked it!

@AleProtti

Boosted

Print Profile

A1 Mini - 0.08mm layer, 2 walls, 100% infill

perfect

The designer has replied

@cloudynostalgia

Wow that looks cool with the purple! Thank you for the rating!

@DaveintheFort

Boosted

My boy's favorite color is purple, had to add some to his current favorite Disney character!

The designer has replied

@cloudynostalgia

The purple came out nice! Thank you for your share and support!! I hope you son likes it!

@schmantz6562

Print Profile

A1 Mini - 0.08mm layer, 2 walls, 100% infill

My first Hueforge and I'm hooked, itprinted perfectly.

The designer has replied

@cloudynostalgia

I am honored that this was your first hueforge!! Thank you for your support! You should definitely upload the print profile incase anyone likes these colors instead! It came out beautiful!