HSW sticky strip wall mount
Copyright Claim
HSW sticky strip wall mount
Boost
22
71
6
Print Profile(1)
0.24mm layer, 4 walls, 15% infill
Designer
18 min
1 plate
Open in Bambu Studio
Boost
22
71
6
2
33
38
Released
Description
Found a few sticky strip mounts online but none held the HSW frame in place, so here is my design with a tapered hole and simple tapered peg that holds the HSW frame back, to remove just push the peg back out. As for what to use when sticking these to the wall, i've found nano tape the best as it holds VERY well but also peels off cleanly when removing from the wall. (twist the base to remove nano tape when attached to the wall)
19/6/24 Whilst browsing facebook bambu lab groups I came across this design of mine being discussed and asking how to remove the decals, so I thought what the heck add a version in the files.
Comment & Rating (6)
All
Print Profile
0.24mm layer, 4 walls, 15% infill
had no problems printing this. thanks
1
Reply
Print Profile
0.24mm layer, 4 walls, 15% infill
the peg does not print pretty, but it still works.
overall I can recommend this print
The designer has replied
1
Reply
Thanks for the feedback, I might add that I made the peg with a .24mm layer on purpose so that it grips to the inside of the rough inner cone as a extra hold in place method. Feel free to improve it, that's what I love about designing, is others helping to improve designs.
(Edited)1
Reply
Print Profile
0.24mm layer, 4 walls, 15% infill
Prints well, and works perfectly for keeping HSW panels up with command strips
0
Reply
Print Profile
0.24mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.24mm layer, 4 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld