Q-Tip Crossbow - Free 3D Print Model

Search models, users, collections, and posts

Sairae

Toys & Games>Other Toys & Games

IP Report

GIF

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 5 walls, 40% infill

Designer

58 min

1 plate

3.6(179)

SUPER STRONG BOW 100% INFILL

1 h

1 plate

3.8(50)

2 colors a1 mini

1.3 h

1 plate

2.3(6)

strong and no supports 0.2mm layer, 2 walls, 15% infill

1.2 h

1 plate

3.0(1)

Open in Bambu Studio

Boost

1101

2464

295

5 k

3.9 k

Released

Description

Introducing the second model in my Q-tip shooter series… The Q-Tip Crossbow! Simply pull back the latch until it clicks onto the trigger, load a one-sided Q-tip or toothpick, pull back the trigger, and watch it fly!

Notes: This model will vary depending on filament. I used Bambu PLA basic which tends to be pretty stiff, so other types of PLA, especially cheap brands, may not yield as good of a result.

Keep in mind that brittle/wet filament will be more subject to cracking than newer filament.

With other models in this series, people have had good results with PETG, but I have not personally tested it.

Make sure to let the model completely cool before using, or else the springs will deform and not be as effective.

Check out the original model: https://makerworld.com/en/models/412624#profileId-314579