EGO 56v Battery Mount by franklindroosevelt

franklindroosevelt

Tools>Organizers

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 4 walls, 15% infill

1.4 h

1 plate

Boost

Released

Description

Low profile mount for EGO 56v lithium battery. Strong enough to hold batteries on the underside of a shelf.

Use #8 screws to attach
Painters tape and a square helps align square with the shelf
Print in red for your extra spicy batteries

Comment & Rating (4)

@johncaruso

Model printed well! I'm curious what the largest size battery you've used with this is? I have a 6ah that feels really heavy and I'm not sure I want to test it out on that first. Going to stick with using this for just the smaller 2.5ah for now, unless you've had good experience with the larger ones?

The designer has replied

@frankdroosevelt

I've used both the 4 Ah and the 5 Ah batteries on it (currently in use). My original design put the screws through the main flat plate (attached image). You could see that there was a little gap at the sides where the battery was loading the mount, so I put the screws in the sides to cut way down on the bending load and that made a huge difference. If you try with the bigger battery and it works out, let me know how it works out!