Hey,
I designed a wall mount for my Nintendo Switch because it is always far away from the docking station and I don't want to leave it lying around. I designed it to be easy to print, but you need 3 screws M4x25 and 3 M4 nuts and of course the screws and plugs to mount it on the wall, I designed three holes in the back plates. You can first screw the back plates to the wall and then screw the front. I made them relatively thick so that they will fit even with handier controllers. You should be able to print everything in horizontal position without support, but I might recommend a brim.
Translated with www.DeepL.com/Translator (free version)
Printer:
Geeetech A10
Rafts:
No
Supports:
No
Resolution:
0,3
Infill:
10%
Filament:
Geeetch PLA,PETGBlack,Red
Category: Video Games