非二次创作 No secondary creation
中文:
【在切片软件中可以随意更改字的内容。】
我在其他论坛上看到这个模型就爱上了它,但我下载后发现他们制作过程非常繁琐,需要螺丝,而且有点简陋,我重新建模设计了一个升级版本,可以让大家一次打印就完成,无需任何其他操作!
我的配色为木色、红色、金属灰、金黄色。
兼容侧面夹式手机支架
背面留有两个磁铁凹槽,放置直径1.8-2.1cm厚度0.15-0.25cm的磁铁,可以稳定贴在冰箱上。镰刀锤子最好也用一点胶水固定。
盒子底部留有一个插入透明材料的缝隙,建议使用0.3-0.5mm的透明PVC,尺寸建议62*78mm(越厚越硬越容易安装)
镰刀锤子为一体打印,支撑容易拆除,请务必使用优质耗材才能出来好的效果。
#本模型只是作为一种娱乐符号产品,不代表任何个人立场、政治观念、信仰文化的理念。
我是一个脑洞大开喜欢原创的作者,欢迎查看我的其他作品。
-----------------------------------------------------------------------------------------------------------------------------------------
EN:
【 The content of words can be changed freely in the slicing software. 】
I saw this model on other forums and fell in love with it, but when I downloaded it I found that they were very tedious to make, requiring screws, and a bit crude, I re-modeled and designed an upgraded version that can be done in one print without any other operation!
My color scheme is wood, red, metal gray, gold.
Compatible with side clip-on phone holders
There are two magnet grooves on the back to place magnets with a diameter of 1.8-2.1cm and a thickness of 0.15-0.25cm, which can be stably affixed to the refrigerator. The hammer and sickle should also be secured with a little glue.
There is a gap at the bottom of the box to insert the transparent material, it is recommended to use 0.3-0.5mm transparent PVC, the size is recommended 62*78mm(the thicker the harder the easier to install)
The hammer and sickle are printed in one piece, the support is easy to remove, please be sure to use high-quality consumables to get good results.
# This model is only used as an entertainment symbol product, and does not represent any personal position, political concept, belief culture concept.
I am an imaginative and original writer, please check out my other works.