Hueforge of the game “Season After Fall”, split in puzzle pieces.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Orange Transmission Distance: 5.9
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Mistletoe Green Transmission Distance: 5
PLA BambuLab Matte Grass Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Brown
At layer #13 (1.12mm) swap to Dark Red
At layer #14 (1.2mm) swap to Orange
At layer #15 (1.28mm) swap to Mandarin Orange
At layer #16 (1.36mm) swap to Lemon Yellow
At layer #17 (1.44mm) swap to Jade White
At layer #19 (1.6mm) swap to Mistletoe Green
At layer #22 (1.84mm) swap to Grass Green
At layer #25 (2.08mm) swap to Jade White for the rest.

Happy printing and putting it together !