This is a follow-up to the Square Geometric Panel ( https://makerworld.com/en/models/129286 ) that i released previously
This panel is slightly thicker to accommodate a new design where i have some of the shaves indented in to the panel to make a more pronounced 3D effect, this also lets you print the deepest parts a different colour and you can do that with just a layer change for those without an AMS, although for those with an AMS this lets you do all sort of colour combinations
There are 2 versions of the panel, the only difference is that one comes with 4 holes on the back for using the connector pin to connect it to something else or if you wanted to mount these to a panel etc, the mounting and side connector holes are 5.3mm wide and 3.3mm deep