Geometric Decorative Panel with Spaces for Magnets - .f3d included
Boost
62
95
5
Print Profile(1)
0.2mm layer, 2 walls, 10% infill
6.3 h
4 plates
Open in Bambu Studio
Boost
62
95
5
0
109
44
Released
Description
This model was inspired by a user on a discord server who was asking if anyone had an STL for a geometric panel they had seen online
This panel is 128mm x 128mm by 13.90mm, the corner connector is 128mm x 10mm x 10mm
The 2 panels with holes for magnets and the connector feature a hole for fitting a 3mm x 2mm sized magnet and the holes have a small tolerance of 0.3mm to account for 3D printing, the panels feature 2 holes along each side so you can connect these panels in any direction and the corner connecting piece features magnet holes along both sides and the top and the bottom to allow you to stack these vertically
This was modelled up in Fusion 360 and the .f3d is included if you want to edit the panels to your liking
Comment & Rating (5)
All
Hi! this looks interesting- do you have any photos of multiple panels together? Thanks!
The designer has replied
1
Reply
Heya, printed off another panel to show you it attached to another and attached to the corner, hope that helps :)
3
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
.
0
Reply
Uploaded a new hexagonal panel here https://makerworld.com/en/models/422724#profileId-325839
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld