这是一款适配方形香片的车载香薰支架，盖子与底座连接的部分用到了3x8尺寸的磁铁两颗，如果手头没有磁铁也可以直接打印一个底面圆直径为3高度为7的圆柱体来实现安装，同时盖子的部分也可以有替换装

This is a car aromatherapy holder to adapt to the square piece of incense, the cover and the base of the connection part of the 3x8 size of the magnet used two, if there is no magnet on hand can also be printed directly on the bottom of a circle with a diameter of 3 height of 7 cylinders to achieve the installation, at the same time, the cover part can also be replaced with the installation!