30pc Puzzle. Gap between pieses is in cad 0.2mm.

Set 2 (plate 1 and 2) uses 5 colors (lightblue, yellow, beige, black and white). Yellow (hair) is only up to layer 13, and black (contours) starts at layer 14. So added a pause at beginning of layer 14 on theese plates, so when printer informs pause, change yellow roll to black. (If yellow is loaded in the printer when paused, hit resume, and change when yellow is unloaded. Please check the preview before in the slicer to see wich color starts layer 14, it cant be Yellow/black).

So in slicer contours are set to yellow (that will print as black after rollchange)

If you have 2 AMS, you can remove pause and use 5 colours.

Al the other 6pc sets uses 4 or less colours.

All backsides are lightblue, and ontop white. Ratio differs how many layers of white is ontop, and that makes different shades and an icy look.

Layerhight has to be 0.1mm to have this to work.

Please let me know if there is a problem