Print at 10% infill with a layer height of 0.2 mm with a base layer of 0.2 mm

Filaments Used:
PLA Blue
PLA Light Blue
PLA Silk Blue-Green
PLA Brown
PLA Light Brown

PLA Orange
PLA Yellow

Swap Instructions:
Start with Blue
At layer #5 (1.00mm) swap to Light Blue
At layer #9 (1.80mm) swap to Blue-Green
At layer #13 (3.20mm) swap to Brown
At layer #17 (4.20mm) swap to Light Brown
At layer #21 (5.20mm) swap to Blue-Green

At layer #25 (6.20mm) swap to Orange

At layer #29 (7.20mm) swap to Yellow for the rest

The image has 12 layers, original size 240 mm x 230 mm x 6,4 mm

Design for non-commercial prints only!!!