IMPROVED AMS Lite Wall Mount Adapter Remixed by Wolf3DP

Remixed by

Wolf3DP

3D Printer>3D Printer Accessories

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

3.1 h

1 plate

5.0(17)

PETG - 0.2mm layer, 6 walls, 25% infill

6.3 h

1 plate

5.0(4)

0.2mm layer, 3 walls, Gyroid 10%

3.4 h

1 plate

5.0(1)

0.6mm nozzle, Arachne, 0.24mm layer, 3 walls, 25% infill

4 h

1 plate

Open in Bambu Studio

Boost

121

Released

Description

This improved AMS lite wall mount features a wider and taller base, eliminating wobble when installing and removing spools as well as eliminating rubbing of larger diameter spools on your wall!

I recommend using #12 drywall anchors if you're not mounting on a stud. You can use the same screws that the stock stand mounts with to attach the AMS. Mount the adapter to the wall first and then attach the AMS! I printed in PLA and it's fine so far, but given the potential weight on the system, I'd recommend printing this in PETG! Both parts can be printed at the same time on the A1 Mini :)

Comment & Rating (35)

@brianbang435

Boosted

Print Profile

PETG - 0.2mm layer, 6 walls, 25% infill

Works great

The designer has replied

@Antassium

That's awesome! Glad it worked out for you :D P.S. As a little update, been over a month now and mine in PETG is still very sturdy and has had 0 issues.

(Edited)

@Mici

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Many thanks for this model. The printing went without a flaw. Unfortunately I haven't gotten around to mount it yet, but it looks very rigid.I made a few tweaks and used a 0.6mm nozzle. I will upload the profile so that others can use it too. I hope you enjoy it.

The designer has replied

@Wolf3DP

I printed mine with a 0.6 as well actually because I'm impatient haha. Glad you like it! Thanks for sharing

(Edited)

@delapopo

Print Profile

PETG - 0.2mm layer, 6 walls, 25% infill

held the new ams lite perfectly

The designer has replied

@Antassium

Rad!!!

@idlira

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Thanks for sharing this! Top design and print quality. Beware if you are using the A1 to place the AMS high enough, so the lower spools do not touch your printing model if you print something large in height.

The designer has replied

@Wolf3DP

Looks great! So glad you like it

@rickycalder

Boosted

printed in eSUN petg. mounted into brick. great print no issues, no adjustments to print profile needed

The designer has replied

@Wolf3DP

Looks awesome! It's not going anywhere for sure lol

@ginjasy

Print Profile

0.2mm layer, 2 walls, 15% infill

Works great. So far so good.

@user_1332899319

Print Profile

0.2mm layer, 2 walls, 15% infill

Worked great- thanks!

@Just_Barrett

Boosted

Print Profile

PETG - 0.2mm layer, 6 walls, 25% infill

Used the Petg profile after part of the bottom shell of pla broke off after dropping it.

The designer has replied

@Antassium

Awesome! I'm nearing 2 months of use and have a second one for my A1 Standard's AMS Lite mounted in my server rack. The PETG version seems to be holding up really well for me.