Milwaukee Brewers lightbox. I used .4mm nozzle with .08mm layer height on front. On the stand I used .4mm nozzle with .20mm layer height to make it print faster. I used a textured plate for front and back but used a cool plate for stand due to warping. You could try a brim on a textured plate for stand I didn't try it. Before printing on machine turn off flow calibration for front. I added a led hole at 13x7mm. I added Two hanger holes one at 10x10mm and second hole at 7x7mm. Any of the holes can be adjusted or deleted to fit your needs under objects in bambu slicer.
Filaments used Overture matte white, Overture matte black, Overture highlight yellow, and Overture digital blue.