Rhinoceros hueforged
Here you can find all my HueForge creations. https://makerworld.com/en/@MicheleMM3D/collections/503504
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Beige
At layer #14 (1.2mm) swap to Jade White
At layer #22 (1.84mm) swap to BambuLab Green for the rest.