My wife loves Egyptian decor,.. so this is more then likely the first of many egyptian hueforges to come. I added the gold as a highlight touch,. its not super noticable but when the light catches it the print comes to life almost.

If you only have 1 AMS and would like to do it in 4 color, you can remove the basic brown (as the black pretty much covers it all) and the gold. I will be adding another upload aimed at only 4 color, look for it in my profile

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Dark Brown Transmission Distance: 1.9
PLA BambuLab Basic Gold Transmission Distance: 5
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.2

Swap Instructions:
Start with Brown
At layer #5 (0.48mm) swap to Charcoal
At layer #6 (0.56mm) swap to Dark Brown
At layer #8 (0.72mm) swap to Gold
At layer #10 (0.88mm) swap to Latte Brown
At layer #16 (1.36mm) swap to Ivory White for the rest.