Solid XL Trash Can with flap lid by Every Day Counts

Every Day Counts

Household>Other House Models

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.24mm layer, 2 walls, 15% infill

Designer

16.9 h

3 plates

5.0(7)

Boost

Released

Description

This is an updated version of my previous XL Trash Can designed to be printed in ‘Standard’ mode, bringing extra strength and a solid feel.

I have provided an optional flap-style lid, which raises the height to around 30 cm (1 foot). The body is 210mm in diameter (8.25 inches or so).

The lid requires a spring to hold it shut. I used an extension spring measuring 5.5x25.5mm. See the photo below.

The sample print was created with Bambu PLA Sparkle (Onyx) mixed with Basic PLA (white).

The design has not been created to be scaled. If scaled down, the walls on the main bin may be too thin to be sturdy. With the lid, the gaps will be reduced, causing the lid to not perform correctly.

Please give me feedback on the design and printing experience. I would greatly appreciate some rating stars, a nice comment, and a photo.

Comment & Rating (15)

@para

Whoops I posted on the wrong one. Is this to be expected? Seeing some rough part on the seam.

The designer has replied

@para

It's a trash can so it's realllllly not a big deal haha, but was curious if it was common or I gotta do some maintenance on my printer.

@EveryDayCounts

Replying to @para :

Thanks for reaching out, @para. It's a fair question. The good news is that it's not your printer but rather the settings for your filament. Use the Bambu Studio to create a calibration of the Pressure Advance for that filament. See the instructions at https://wiki.bambulab.com/en/software/bambu-studio/calibration_pa. After performing this, you will notice a big difference. It's also worth running the calibration on the flow rate. Ensure that you select the newly created settings for the filament before printing.

@EveryDayCounts

Replying to @para :

Just for interest, here is a photo of the seam on the demo print.

@para

Print Profile

0.24mm layer, 2 walls, 15% infill

Heavy and sturdy. Very happy with it.

The designer has replied

@EveryDayCounts

Thanks @para . It's just like mine!

@user_3814403825

Print Profile

0.24mm layer, 2 walls, 15% infill

Nice

@user_99161544

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

Really strong print for PLA. A seal on the lid would be kinda nice.

(Edited)

@deshultz

Print Profile

0.24mm layer, 2 walls, 15% infill

Came out great!

@bradle48

Boosted

Great design!

@bradle48

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

@Ziivan

Print Profile

0.24mm layer, 2 walls, 15% infill

@user_3017611715

Print Profile

0.24mm layer, 2 walls, 15% infill

(Edited)

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

140

Print Profile(1)

Description

Comment & Rating (15)

License

Related Models

Can lid for aluminum cans

Custom Trash Can & Storage Range

Soda can lid

Trash Can