Trash Can
Trash Can
Print Profile(2)
Description
The original webpage for this post is on Printables. It was transferred here through the automated system, so some formatting, file links, etc. may not work as intended. Please see Printables for original post or see my full collection of designs on Cults3D. -Abby
Trash Can with separate Lid or as a Solid Model
Original design for the 2024 Christmas Community Print Drive.
Two versions are included: Solid Model and Bottom/Lid version with two parts. My kids insisted that I create the design that opens after I started with the solid version. The lid prints without supports by bridging across the opening that goes around the brim of the open can.
More Models: Collection of all approved 2024 Christmas Community Print Drive models
Additional Information and Print Settings
The model is approximately 55 x 55 x 71 mm. I printed with 0.25 mm layer height, 2 perimeters, 3 top and bottom layers, and 15% infill. No supports. No raft.
| If you are printing for the Community Print Drive, be sure to use the appropriate guidelines: 2024 Christmas Community Print Drive Printing Guidelines |
More of my designs on Cults3D: https://cults3d.com/en/users/abbymath
Not for commercial use. No derivatives. See license below.
Note: Most photos from earlier, smaller model. Print Drive standard models are posted here.
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
