This model is a remix of the TNG Tricorder by UnimatrixRed. Each color is on a different plate. I used the 6x2mm magnets to hold the lid closed. I got the magnets from Amazon. Pretty cheap.

I used a paperclip that I straightened out for the hinge pin and not the one that is printed, and it worked well for me. I have included pictures of the hinges as I bent and made them work. Else, to connect the lid to the body, insert its arms into the slots then insert the hinge pins into the rectangular holes and slide them outward until secure. **Each pin fits only one side so you will need to match them up. The key plate then covers the rectangular holes.

Use supports for the grips (print them standing up for best results) and the side button.

Screens and other markings to print with a regular printer are in the raw files.

Please support the original designer UnimatrixRed on the original link. This and the other models are mainly his designs just tweaked and laid out for the Bambu printers.