Note: The included profile uses PETG support interface. Make sure your flushing volumes are set to at least 800 if you are going to use the PETG supports method. The flushing volumes will automatically change when you change the filaments & colors so make sure to double check before printing.

Helps prevent your yarn from getting stuck and is also a great safety measure for your tufting gun! These can be applied to both sides of your gun and should work for most guns of this style. I designed the screw holes so that there is a ton of room for guns with differently spaced screws. Just make sure to align the guards properly so that there is enough space between them and the gear.