I ordered the newly introduced TS100 variant of Stefans (CNC Kitchen) Threaded Insert Soldering Tips. A link on the packaging states “Print your case” and refers to the original case.

The case itself fits and I really like the design of it, but the Tips are not hold tidely in it, as they are shorter than the M900 version. Additionally there is no space for the TS100 Soldering Tip Adapter.

As it is very important for me to have everything of this set hold together in one box, I decided to remix the lid of Stefans great case.

What I canged compared to the original case from CNC Kitchen:

I reduced the free space above the tips in the lid of the case and added a Tip Adapter holder on the side of the lid.

The Tip Adapter is attached to the case by his M5 thread for the tips. For this you will need a “M5 Short” (~M5x6x7) threaded insert that you can already insert with your new adapter ;-)

As it is not that easy to insert the threaded insert through the upper hole without melting this, I made two versions. On with a blind hole for the experienced guys and a more simple one with a through hole that you can insert from the lower end.

You still need to print the basic case from the original version, as I did not do any changes on that. There a two versions available from Stefan, which you can choose from.