Edit: thanks @RoboCZ for his print profile for printers with AMS!
Just a cute fat hamster with some space inside! Use it as a gift box or hide your favourite candy inside :)
Print in place, no supports. You can print both parts at once.
Scaling: Don’t forget to scale both parts equally. There is enough tollerance for the thread to work fine. I recommend at least 50% size, but I tried 40% and it worked too. The yellow hamster on the picture is about 55mm high, with scaling down to 55%.
You can use the “paint seam” tool to paint the seam on the back, or use the settings (seam position: Rear).
I made 2 options for the bottom part:
Layer height: For the smallest one (40% scale) I used 0.1 mm layer height. For bigger ones (50% and bigger) I used 0.15 mm.