The stock hand crank (for dust filter cleaning) is too long and hits the wall (with the angle I installed it at). I designed a shorter one.
Features:
- Smooth turning with a 608 bearing in the handle
- ~ 12 cm handle length (half that of the OEM one)
- fits 12mm diameter shaft with ~1mm notch
Hardware Required:
- a 608 bearing
- M8 x 30mm bolt
Print Setting:
- PETG preferred
- 0.4mm nozzle
- 4 perimeter, 25% infill
- Print at 101% or 102% if the fit is too tight with PETG (especially the handle, long bolt might be tight fit)
Note:
- the print file contains 3 individual objects.
- 3D preview shows the assembled view.