Paint Roller Cleaner

Copyright Claim

Paint Roller Cleaner

Boost
93
113
11

Print Profile(4)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.1 h
1 plate
5.0(3)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.9 h
2 plates

Strength Profile, 0.2mm layer, 6 walls, 25% gyroid infill
Strength Profile, 0.2mm layer, 6 walls, 25% gyroid infill
2 h
1 plate
5.0(4)

Single Color - 0.2mm layer, 2 walls, 15% infill - A1 mini
Single Color - 0.2mm layer, 2 walls, 15% infill - A1 mini
1.6 h
1 plate
5.0(1)

Open in Bambu Studio
Boost
93
113
11
1
111
85
Released

Description

Easily scrape paint off roller brush.
The diameter of the holes is 4.5 cm and 5 cm - depends on the height of the pile on the paint roller.

Why clean the paint roller at all.

A new roller holds less paint. so you must return to the paint tray more often.

A used roller absorbs more paint from the tray. it means the roller will cover more wall. saving time and effort.

Tool encourages painters to clean rather than throw away rollers.

Furthermore, a new rollermayleave lint on the freshly painted wall.And you must either remove lint of a new roller or pick lint from the wall. Both are time consuming and frustrating.

Theused roller has already lost its loose fibers so they won’t be left on the wall.

A roller can hold a large amount of paint. and they are not cheap. Tossing them after every job is neither cost efficient. nor environmentally friendly.

 

Post-Printing

image

Comment & Rating (11)

Please fill in your opinion
(0/5000)

Print Profile
Strength Profile, 0.2mm layer, 6 walls, 25% gyroid infill
Super Modell. Bin schon gespannt wieviel Farbe es aus der Rolle holt! :)
The designer has replied
0
Reply
Danke für die Bewertung!
0
Reply
Print Profile
Strength Profile, 0.2mm layer, 6 walls, 25% gyroid infill
Super praktisches Tool. Habe es immer gehasst, die restliche Farbe mit der Hand abzustreichen. Ich werde das Teil demnächst einmal in Gebrauch nehmen.
(Edited)
The designer has replied
0
Reply
Danke für die Bewertung und das Teil sieht sehr gut aus!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed well with the original makers print profile
0
Reply
Print Profile
Strength Profile, 0.2mm layer, 6 walls, 25% gyroid infill
super
0
Reply
Print Profile
Strength Profile, 0.2mm layer, 6 walls, 25% gyroid infill
Useful print
0
Reply
Flip it upside down and turn off supports 😉
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Single Color - 0.2mm layer, 2 walls, 15% infill - A1 mini
0
Reply
No more