Luce Led Upgrade for Bambulab x1, p1 (panda lux)
Copyright Claim
Luce Led Upgrade for Bambulab x1, p1 (panda lux)
Boost
16
39
12
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
34 min
1 plate
Open in Bambu Studio
Boost
16
39
12
0
38
19
Released
Description
Copia del Bigtreetech panda lux. Si monta nella scocca frontale con scotch o magneti. La differenza di luce rispetto all'originale è ben visibile
Comment & Rating (12)
All
Any insights on how to get an LED strip that pulls 0.3A like the panda lux?
The designer has replied
1
Reply
i mounted a simple 5v led strip
0
Reply
Replying to @XentoBi
? the internal header uses 24v, so you ran a separate power supply? Just curious, it seemed like this was wired internally.
0
Reply
Replying to @AeonJoey
no no i connected the led on the 5v pin led, instead of original led
0
Reply
Ok I dont know why this is so bad, I can only think the LEDS I bought are very low to keep it under the 0.3AV advised by Bambu for the interal connector. The really DARK internal one and the OVER expoxed front Edge TOP down view are the ones with this mod fitted. The other two .. dim but not as dark and equally lit top down view are the "STOCK" light plugged in.
Appreciate any advise on LEDS others have used - these are the ones I used.
https://www.aliexpress.com/item/1005006946739383.html?spm=a2g0o.store_pc_home.promoteRecommendProducts_2006892029334.1005006946739383
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Perfect print. Very efficent
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld