Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.4
PLA+ Jayo Violet Transmission Distance: 2.6
PLA+ Esun Pink Transmission Distance: 4.5
PLA Jayo White Transmission Distance: 16

Swap Instructions:
Start with Black
WARNING: This Slider is at the same Layer as the Next Slider
At layer #14 (1.2mm) swap to Violet
At layer #14 (1.2mm) swap to Pink
At layer #17 (1.44mm) swap to White for the rest.