Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA 3Dline Basic Black Transmission Distance: 0.6
PLA 3Dline Red Transmission Distance: 4
PLA 3Dline Yellow Transmission Distance: 6
PLA 3Dline Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #15 (1.28mm) swap to Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.