This here is a perfect addition to a home of Mario lovers! He's a 2-in-1 planter, perfect for Venus fly trap plants and moss! I designed his head to drain excess water into his stem that then drains to provide a drink to the lower plant. Here I finished the design to have 4 holes on the bottom, in case the two plants are both flooded. He was printed on an ender 3 pro and a bamboo X1 Carbon, both had a 0.4 nozzle, were 200 degrees on ender, 220 on carbon, 60-degree bed plate, as for filament I used white PLA from hatch box, he was printed at 50% infill on gyro, to ensure its stability, and used tree supports all over to help the survival of the leaves when printed whole.

     This piranha plant was painted with acrylic paint, I recommend folk-art outdoors. Also was coated with a clear spray-paint, corrosion safe, to seal everything up. I'm still currently editing this piece to improve it. You can also print this where you don't have to paint it, (personally I like the paint look). I have 3 files attached one is whole, downside… its tall, and prints smaller… the two others are this model split in half, need to be superglued, work's best for a bigger pot! If you have any questions comments or concerns feel free to reach out! Thank you for using this model, feel free to share it around!