Filament profiles and swatch models for you to use.
These are the settings I've settled on for now. Please let me know how the settings work for you. They differ significantly from the settings published by 3D-Fuel. I found layer adhesion suffered a lot at their default temperature and the surface characteristics, shine, and luster suffered a lot when printing at their higher volumetric flow rates. The lower rate produces a consistent shine/luster on everything I've tried so far.
Instructions
Filament Profile Instructions:
Download the filament profile zip file (Download STL)
Open either Bambu Studio or Orca Slicer
Import the filament bundle zip file. (File → Import → Import Config…) and select the Filament Profile Zip file
If the import dialog says only one profile was imported, repeat step 2.
When it asks to confirm overwriting the profile of the same name, choose yes.
When successful 2 profiles should have been imported.
3MF Instructions:
Download the Raw 3MF file corresponding (Download 3MF)
On the left you should see the filament profile
If you press the edit icon to the right, in the next dialog press the save icon and you can choose to save it as a User Preset
Updates
2 May 2024
New profiles: Cobalt Blue, Fire Engine Red, Snow White