Steam Deck Joystick Guards
Boost
38
66
16
Print Profile(1)
0.12mm layer, 4 walls, 15% infill
Designer
17 min
1 plate
Boost
38
66
16
1
110
156
Released
Description
Joystick guards for traveling without a case.
- Use 6x2mm magnets and snap in gently. If they are lose, can be glued (not my case at least).
- No supports needed.
- Bolts are not needed since it has a hinge printed in place
Comment & Rating (16)
All
Print Profile
0.12mm layer, 4 walls, 15% infill
Work great! Although the friction fit is adequate, gluing in the magnets wouldn’t hurt either as I did have them separate when accidentally dropped once.
1
Reply
do they work for the Oled Version?
The designer has replied
0
Reply
In theory yes, since external dimensions have not changed. but I dont have one to test it :(
0
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
amazing print that encompassed hinges which were printed in situ and functional perfectly once you release them carefully! - and magnets not really needed!
1
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
fast and easy print.
0
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.12mm layer, 4 walls, 15% infill
Other Issues:the hinge broke immediately
0
Reply
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld