I wanted an alternative mounting option for Multiboard that results in minimal damage to drywall. Screws leave large holes, and adhesive mounting often damages paint or leaves behind residue that is hard to remove. Using nails allows for a fairly sturdy mounting option that leaves relatively little damage.

Recommended for light to medium duty only.

The provided files are designed for nails that are 1.4mm in diameter. The holes are oversized by 0.2mm. For different sizes, you may edit the configuration:

8 mm, Offset Snap Nail | Double Sided Snap - Part A (onshape.com)

To hammer the nail all the way in, some sort of long, thin object can be held against the nail head. I used a screwdriver shaft.