在P1S0.2mm标准设置中，象脚补偿参数默认为0.15，模型打印质量非常高。

但是A1 mini机型象脚补偿默认参数为0，即使套用P1S参数0.15，打印效果仍然不好。

所以我是用Bambu Studio简单制作了象脚补偿测试模型，帮助大家选择正确的设置参数。

选中需要测试的耗材丝，直接切片打印，选择效果最好的小圆片，将圆片上显示的数字填入到象脚补偿一栏即可

In the P1S 0.2mm standard setting, the default parameter for elephant foot compensation is 0.15, and the print quality of the model is very high.

However, for the A1 mini , the default parameter for elephant foot compensation is 0, even if the P1S parameter 0.15 is applied, the printing effect is not good.

So, I created a simple elephant foot compensation test model using Bambu Studio to help everyone choose the correct setting parameters.

Select the filament to be tested, slice and print directly, choose the best-looking small circular piece, and fill in the number displayed on the circular piece into the elephant foot compensation column.