英德拉配套弹匣，设计参考了工匠大师的十发软蛋弹匣。适用于13*36mm海棉软蛋。

除打印出的两片壳及顶座外，需要4颗M3*18或M3*16或者其他M3长度的沉头螺丝（能够将两片壳固定即可）；以及一根25mm宽，18mm厚，150mm长的Z型弹簧，0.6mm线径或者0.8mm线径（弹簧尺寸不需要一模一样，能放进去就行）。

除用螺丝固定外，亦可以用胶粘，壳上预留两条槽，可以缠些装饰物起固定美化作用。

此外，模型附赠海绵软蛋的替代模型，可用于此弹匣及吹气发射器。

The Indra magazine kit, designed with reference to the artisan master’s ten-shot soft dart magazine, is suitable for 13*36mm sponge soft darts.

In addition to the two printed shells and the top mount, you will need four M3*18 or M3*16 countersunk screws, or other M3 length screws that can fix the two shells together；as well as a Z-shaped spring that is 25mm wide, 18mm thick, and 150mm long, with a wire diameter of 0.6mm or 0.8mm (the spring size does not have to be exact, as long as it fits).

Besides using screws for fixation, you can also use glue. There are two reserved slots on the shell for winding some decorative items for fixation and beautification purposes.

Additionally, the model comes with an alternative model for the sponge soft dart, which can be used for this magazine and blow launchers.

ps.

打印时建议将课题头部分割打印，减小打印难度，打印后粘起来即可。