Bambu P1S Poop Chute
Remixed by
Copyright Claim
Bambu P1S Poop Chute
Remixed by
Boost
525
932
1020
Print Profile(6)
FAST PLA 0.2mm layer, 3 walls, 10% infill
Designer
2.5 h
1 plate
Regular print, 0.28mm layer, 2 walls, 15% infill
2.7 h
1 plate
0.22mm layer, 3 walls, 10% infill
2.7 h
1 plate
Generic Silk PLA, 0.24mm layer, 3 walls, 10% infill
4.2 h
1 plate
Click to see more
Boost
525
932
1020
19
5.3 k
5 k
Released
Description
I made a remix of ed.burnett25 desing so it would fit p1s and collect all of the poop, i made it 20mm longer and 20mm higher on the other side. I made some modifications so the top walls are level after i printed one for my self so it looks a bit different in the pics.
Comment & Rating (1020)
All
Print Profile
FAST PLA 0.2mm layer, 3 walls, 10% infill
very very nice in ASA-X CF10 !!!
2
Reply
Holy eff that looks nice with that Filament.
(Edited)2
Reply
Print Profile
FAST PLA 0.2mm layer, 3 walls, 10% infill
was literally my first print with the p1s and Bambu basic pla. unboxed the printer, ran the calibration and started the print.
1
Reply
you don't need a brim for a base that large
0
Reply
Print Profile
Regular print, 0.28mm layer, 2 walls, 15% infill
Fast and easy to print
(Edited)
1
Reply
Print Profile
FAST PLA 0.2mm layer, 3 walls, 10% infill
Sehr gut zum Drucken und sieht toll aus 👍
0
Reply
Boosted
Printed well enough, must have been a slicer issue as the back right corner didn’t form correctly and has some mis extrusion. I fully blame that on the older filament I had to unintentionally switch to half way through the print.
0
Reply
Boosted
Print Profile
FAST PLA 0.2mm layer, 3 walls, 10% infill
Printed well enough, must have been a slicer issue as the back right corner didn’t form correctly and has some mis extrusion. I fully blame that on the older filament I had to unintentionally switch to half way through the print.
(Edited)
0
Reply
Print Profile
FAST PLA 0.2mm layer, 3 walls, 10% infill
Einfach auf Drucken klicken und ab geht die Wildefahrt.
0
Reply
Print Profile
FAST PLA 0.2mm layer, 3 walls, 10% infill
very nice, thanks!
0
Reply
Print Profile
FAST PLA 0.2mm layer, 3 walls, 10% infill
Probably the best go-to poop tray.... fits perfect around the bambu. mines not even full yet lol
0
Reply
Perfect 2nd Print after a test Benchy. Uses a good chunk of the demo spool, but heck, a free poop bin. Would recommend and is working well. Can be left just tucked behind the printer (freestanding) or can be fastened with tape or magnets.
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld