Do you find yourself digging through piles of electronics, PCBs, and various bits and pieces in your drawers or storage containers? Let's put an end to the clutter with Gridfinity!

Check out my newest addition: A 1x1x6 Gridfinity Raspberry Pi Pico storage bin. The storage container can fit up to five Pi Picos vertically. While being relatively tight, you can still easily add or remove single Picos without effort.

The model supports friction-mounted 6x2mm magnets.

My preferred printer settings:

• Material: Bambu PLA (Tough) on a Textured PEI Plate
• Presets: 0.20mm Standard
• Walls: 3
• Infill: 13% Gyroid pattern

You can tweak the wall thickness and infill to use less material, but these settings gave me the most even-looking print.

Please share any thoughts or suggestions on this model. I always appreciate your feedback!

My other designs:

Please take a look at my other designs, too. If you can't find what you need, just let me know. I'm here to help fill in the gaps in the collection for you.

Happy Printing!

Gridfinity by Zack Freedman: https://www.youtube.com/watch?v=ra_9zU-mnl8