Wanted a better camera mount after getting an enclosure for my neptune 3 pro. Designed a workable mount that will mount on any of the rods for the Sohida universal enclosure for the Logitech c615. 
The Sohida has rods with a 6mm radius. This should work for any rods with a 6-8mm radius thanks to the tightening clamp aspect.

This is only v2 of this model. The first model would begin to sag as the heat in the enclosure rose and thus the camera would lower.

I recommend using TPU or flex filament. I originally used 95a TPU.

I used default settings in Elegoo Cura for TPU and lowered my printing speed to 40 mm/s with supports for the platform mount. I also used the inclusive mode to ensure the bolts would go in nicely.