File is ready to print, if u want to change frame color swap LASTS layers ( already changed for frame)

U can chose to replace second gray with dark brown as picture

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Matte Ash Gray Transmission Distance: 1.5

PLA BambuLab Basic Silver Transmission Distance: 0.5

PLA BambuLab Matte Ivory or jade White Transmission Distance: 4

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Ash Gray

At layer #9 (0.8mm) swap to Silver

At layer #10 (0.88mm) swap to White for the rest.

Reminder:

My models mostly cover the entire bed,
this means the purge line is sometimes
running through the bottom of the print.
You have 3 options here:
- Leave as is, you can just cut them of afterwards.
- Remove immediately after the purge line is printed.
- Scale the model:

*** WARNING ***
WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT!
The Z-height must always be as original, otherwise the print
is messed up.

If u want to support my work

https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT

For request send me dm