Halloween Day of the Dead 02 - 4 Color Hueforge Filament Painting by ShakaStudio

ShakaStudio

Art>2D Art

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

4 Color AMS - 0.08mm layer, 1 walls, 100% infill

Designer

4.5 h

1 plate

4.9(55)

4 Colors AMS, 0.16mm layer, 3 walls, 100% infill

3.5 h

1 plate

4.9(7)

Open in Bambu Studio

Boost

213

279

394

230

Released

Description

This is part of a Set:

Frame 01 - https://makerworld.com/en/models/39255#profileId-38273
Frame 02 - https://makerworld.com/en/models/40788#profileId-40725
Frame 03 - https://makerworld.com/en/models/42101#profileId-42689

This model has been carefully designed to look great with 4 colors.

This is an easy to print 4 color Filament painting to add to your other Halloween décor.

Only filament swaps! No AMS necessary.

This does not need an AMS to print, but it does make it easier.

If you have an AMS, print directly from the provided print profile.

If you don't have an AMS, open and slice in the Bambu Studio app and add pauses at the provided layer heights for filament swaps.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Swap Instructions:
Start with Black
At layer #8 (0.8mm) swap to Night Gray / Dark Gray
At layer #10 (0.96mm) swap to Matte Grey / Light Gray
At layer #14 (1.28mm) swap to White for the rest.

Comment & Rating (93)

@Juju_bumblebee

Print Profile

4 Color AMS - 0.08mm layer, 1 walls, 100% infill

beautiful

(Edited)

The designer has replied

@ShakaStudio

I like the filament you chose for the background. Which one is it ?

@Juju_bumblebee

I used black, BBLIFE Silk PLA Filament Shiny Black Change to Silk Orange, cyan and white.

@josipzuvela.st

Finished. Again perfect.

The designer has replied

@ShakaStudio

❤️

(Edited)

@leonardo.joy

Great! What order of colors did you use?

@chicostatespe

Print Profile

4 Color AMS - 0.08mm layer, 1 walls, 100% infill

The designer has replied

@ShakaStudio

Came out great!

@Johnathanlopeze

looks amazing! did you using ironing?

@chicostatespe

Replying to @Johnathanlopeze :

I don’t believe so, I printed it 3 times only issue was on my end with the filament getting caught stopping the print over the print and slowly warping it till I checked it the next morning, that was on me.

(Edited)

@Macbambi

Print Profile

4 Color AMS - 0.08mm layer, 1 walls, 100% infill

very nice print

(Edited)

The designer has replied

@ShakaStudio

Is that Matte Black on the right ?

@Macbambi

Thank you very much for this wonderful print.

The designer has replied

@ShakaStudio

Came out great!

@RPM3DINC

Print Profile

4 Color AMS - 0.08mm layer, 1 walls, 100% infill

Enlarged to 119% on all axis, and still printed great!

(Edited)

The designer has replied

@ShakaStudio

Looking good :). I'm glad that did worked out! If you have the spare time, I'm sure you will see an improvement (better contrasts) if printed again with Z axis unscaled.

(Edited)

@jjjlee

Print Profile

4 Color AMS - 0.08mm layer, 1 walls, 100% infill

Simply stunning. A new conversation piece in our house and once I have time I will print the other two to complete the set. Printed with all eSUN filament. Matte black, Matte dark gray, HS gray, Matte milky white.

(Edited)