The Assembly is really easy and need some glue to put toghether. You wouldn't need instructions, but I'll post them anyway.
If you have any doubts, don't hesitate to contact me.
Instructions:
Make sure you have printed all the components, elegant and flower style has the same mounting sistem.
except for the belt pins, the pin must be glued inside the flower .
Glue the 2 holes in the base and insert the base pins:
Put glue in the holes in the middle piece, you can use plenty and also put it in the other support points
now fit the two parts
now put glue over the central piece and fit the final piece with the compartments
After doing that put the 4 little pins in the 4 holes
And now fit this piece on top
Now assembly the belt like in this image, and do the same in the other side:
Put some glue in the hole and fit the belt in the two holes.
here is a detail of the assembly
Now is time for the drawer. put some glue in the knob hole and insert the knob. After doing that put some glue in the holes in the bottom and insert the legs.
Comment & Rating (13)